How to Remove and Replace the Thermostatic Cartridge – step by step guide

1. Locate Controller Knob

2. Loosen the screw on the controller knob.

3. Remove the controller knob

4) Take out the temperature limit, ensuring that the red mark is at the top.

5. After removing the temperature limit, this is how it should look.

6. Go to the back of the shower panel, locate the section behind the knob, and loosen the locking nut (as indicated by the arrow in the picture).

7. Return to the front of the shower panel and remove the trim ring

8. 8) Loosen the screw at the bottom, and the cartridge can be removed.